Short Description
700 Series Optical Shaft Encoder Supplier Honest provides 700 Series Optical Shaft Encoder, Wave Shape: Square wave, 50% "on" and 50% "off", 50 mA ± 10%.
Keywords: 700 Series Optical Shaft Encoder,
 |
Previous: 200 Series Incremental Hollow Shaft Encoder, Kessler-Ellis
Next: Encoder Accessories, Kessler-Ellis
Next: Encoder Accessories, Kessler-Ellis
700 Series Optical Shaft Encoder, Kessler-Ellis Key Specifications / Features
Features
ELECTRICAL SPECIFICATIONS
INPUT
Voltage: 5 VDC, or 8 to 30 VDC (Specify Choice).
Current: 50 mA ± 10%.
Ripple: 2%.
Regulation: ±5%.
OUTPUT
Amplitude: 80% of input voltage (min.).
Current Sink: up to 20 milliamperes (10 milliamperes on multi-output units). 1.5K pull up to input voltage.
Polarity: Positive.
Wave Shape: Square wave, 50% "on" and 50% "off".
Pulse Rate: 0 to 20,000 pulses per second.
Rise Time: Less than 1 microsecond.
Pulses per Rev.: 1 to 1270 (Specify choice).
Accuracy: Within ±0.1 degrees from one pulse to any other pulse.
ENVIRONMENTAL SPECIFICATIONS
Temperature: 0 to 75 degrees C ( +32°F to 167°F).
Vibration: 3 g's at 5 to 1000 CPS.
Shock: 20 g's, 10 milliseconds.
MECHANICAL SPECIFICATIONS
Shaft Speed: 6,000 RPM maximum.
Shaft Rotation: Either direction.
Bearings: Sealed ball bearings.
Starting Torque: 0.10 ounce - inches.
Moment of Inertia: 0.0025 ounce - inches seconds squared.
Radial Loading: 10 pounds operating.
Axial Loading: 5 pounds operating.
Shaft Size: .250" or .375" diameter (Specify choice).
Shaft Type: Single or double ended (Specify choice).
Operating Life: 100,000 hours average.
Housing: Aluminum with black anodized finish. Sealed against dust, oil vapor and moisture.
Mounting: Provisions for either base or face mounting.
Weight: A-10 oz., B- 3.75 lbs., C- 3.25 lbs., D- 6 lbs.
Connector Type: 6-pin MS Connector or Solder Terminals.
ELECTRICAL SPECIFICATIONS
INPUT
Voltage: 5 VDC, or 8 to 30 VDC (Specify Choice).
Current: 50 mA ± 10%.
Ripple: 2%.
Regulation: ±5%.
OUTPUT
Amplitude: 80% of input voltage (min.).
Current Sink: up to 20 milliamperes (10 milliamperes on multi-output units). 1.5K pull up to input voltage.
Polarity: Positive.
Wave Shape: Square wave, 50% "on" and 50% "off".
Pulse Rate: 0 to 20,000 pulses per second.
Rise Time: Less than 1 microsecond.
Pulses per Rev.: 1 to 1270 (Specify choice).
Accuracy: Within ±0.1 degrees from one pulse to any other pulse.
ENVIRONMENTAL SPECIFICATIONS
Temperature: 0 to 75 degrees C ( +32°F to 167°F).
Vibration: 3 g's at 5 to 1000 CPS.
Shock: 20 g's, 10 milliseconds.
MECHANICAL SPECIFICATIONS
Shaft Speed: 6,000 RPM maximum.
Shaft Rotation: Either direction.
Bearings: Sealed ball bearings.
Starting Torque: 0.10 ounce - inches.
Moment of Inertia: 0.0025 ounce - inches seconds squared.
Radial Loading: 10 pounds operating.
Axial Loading: 5 pounds operating.
Shaft Size: .250" or .375" diameter (Specify choice).
Shaft Type: Single or double ended (Specify choice).
Operating Life: 100,000 hours average.
Housing: Aluminum with black anodized finish. Sealed against dust, oil vapor and moisture.
Mounting: Provisions for either base or face mounting.
Weight: A-10 oz., B- 3.75 lbs., C- 3.25 lbs., D- 6 lbs.
Connector Type: 6-pin MS Connector or Solder Terminals.