Short Description
Model No.: SB-110IIISBrand.: Ace GikenClicks: 1449
China Ace Giken Fluid Constant Volume Dispense Valve Supplier Honest provides SB-110IIIS Fluid Constant Volume Dispense Valves, easily maintenance.
- The high viscosity liquid can be efficiently dispensed at high speed.
- Thanks to the rotation control of the screw shaft, you can get a high precision dispensing to a delicate point and lines.
- The dispensing efficiency rises greatly (max 2.5 time dispensing efficiency has improved compared with old goods).
- The place where air and the liquid collect has been decreased greatly, and the calorific value has been reduced too.
- This model has adopted cap-nut method, so you can maintain easy.
- Because the screw liner of the exchange type was adopted, the improvement of the stability, the improvement of durability, and lowering the cost in wear-out parts were able to be done.
- This is a new benchmark model at a screw type dispenser.
Suitable liquid material |
Epoxy, silicone, grease |
Applicable viscosities |
3000~500000mPa.s |
Fluid pressuring method |
Synchronous or always |
Material feed pressure |
MAX 0.5MPa |
Dispensing screw driving method |
Stepping motor servo control |
Motor rotation speed |
6~1500rpm |
Motor power |
DC24~48V |
Motor resolution |
0.72∘/ PULSE (500P/R) |
Externals dimensions |
W71.5xD42xH205 |
Weight |
770g |
Dispensing volume |
0.0001ml~ |
Use |
|