Short Description
China Blue-White Diaphragm Pump Supplier Honest provides Chem-Pro C3 Diaphragm Pumps, efficient, capable of high pressures and high volume outputs.
Keywords: Diaphragm Pump,
 |
Blue-White Diaphragm Pump, Chem-Pro C3 Key Specifications / Features
- Max Feed Rate: 40 GPH / 153 LPH
- Max Pressures: 150 PSI / 10.3 bar
- Variable Speed Drive
- Washdown (NEMA 4X, IP66)
- Back Lit LCD display
- Priming / Degassing Valve – Built-in
- Leak Detection – Built-in Diaphragm Failure Detection (DFD)
- Exclusive Diaflex? Single Layer PVDF diaphragm.
Benefits of a Diaphragm Pump:
- Capable of high pressures and high volume outputs.
- Non-loss motion variable speed DC motor is powerful, quiet and energy efficient.
Capabilities:
- Feed rate resolution 0.1%
- Output rates to: 40 GPH (153 LPH) and pressures to: 150 PSI (10.3 bar).
Communication & Interface:
- SCADA ready 5-30V DC open collector output loop closes while motor is energized.
- Profibus DPV1, Profinet RT I/O, Industrial Ethernet/IP, Modbus RTU and Modbus TCP available
- Signal inputs include: 4-20mA, pulse inputs, and Remote start/stop
- Signal outputs include: Relay (3 amp), open collector, 4-20mA (optional)
- Upgradeable firmware
- Large, intuitive control-pad
- Backlit LCD displays motor speed, input signal values, service and alarm status.
- Includes Diaphragm Failure Detection (DFD) system.
- Compatible with Blue-White’s Flow Verification Sensor (FVS) system
- Alarm relay monitors the DFD system and the FVS system.
Superior Engineered Design:
- Protective LCD snap-on cover, (UV, in field wear and tear)
- Large single piece junction box with terminal block connectors inside
- Large PVDF, Ceramic, TFE/P double ball check valves without metal springs.
- Priming and degassing valve built into the pump head.
- Exclusive Diaflex? Single Layer PVDF diaphragm.
- NEMA 4X (IP66) wash-down, chemically resistant powder coated enclosure.
Patents Pending:
- Exclusive Diaflex Single Layer PVDF diaphragm.
- Max Pressures: 150 PSI / 10.3 bar
- Variable Speed Drive
- Washdown (NEMA 4X, IP66)
- Back Lit LCD display
- Priming / Degassing Valve – Built-in
- Leak Detection – Built-in Diaphragm Failure Detection (DFD)
- Exclusive Diaflex? Single Layer PVDF diaphragm.
Benefits of a Diaphragm Pump:
- Capable of high pressures and high volume outputs.
- Non-loss motion variable speed DC motor is powerful, quiet and energy efficient.
Capabilities:
- Feed rate resolution 0.1%
- Output rates to: 40 GPH (153 LPH) and pressures to: 150 PSI (10.3 bar).
Communication & Interface:
- SCADA ready 5-30V DC open collector output loop closes while motor is energized.
- Profibus DPV1, Profinet RT I/O, Industrial Ethernet/IP, Modbus RTU and Modbus TCP available
- Signal inputs include: 4-20mA, pulse inputs, and Remote start/stop
- Signal outputs include: Relay (3 amp), open collector, 4-20mA (optional)
- Upgradeable firmware
- Large, intuitive control-pad
- Backlit LCD displays motor speed, input signal values, service and alarm status.
- Includes Diaphragm Failure Detection (DFD) system.
- Compatible with Blue-White’s Flow Verification Sensor (FVS) system
- Alarm relay monitors the DFD system and the FVS system.
Superior Engineered Design:
- Protective LCD snap-on cover, (UV, in field wear and tear)
- Large single piece junction box with terminal block connectors inside
- Large PVDF, Ceramic, TFE/P double ball check valves without metal springs.
- Priming and degassing valve built into the pump head.
- Exclusive Diaflex? Single Layer PVDF diaphragm.
- NEMA 4X (IP66) wash-down, chemically resistant powder coated enclosure.
Patents Pending:
- Exclusive Diaflex Single Layer PVDF diaphragm.
| Max. working pressure: | 150 psig (10.3 bar) |
| Max. fluid temperature: | 130° F (54° C) |
| Max. ambient temperature: | 14 to 110° F (-10 to 46° C ) |
| Maximum viscosity: | 1,000 Centipoise |
| Maximum suction lift: | 15 ft. Water, 0 psig (4.5 m, 0 bar) |
| Operating Voltage: | 115VAC/60Hz, 1ph (1.5 Amp Maximum) 230VAC/60Hz, 1ph (0.7 Amp Maximum) 220VAC/50Hz, 1ph (1.0 Amp Maximum) 240VAC/50Hz, 1ph (1.0 Amp Maximum) |
| Power Cord Options: | 115V60Hz = NEMA 5/15 (USA) 230V60Hz = NEMA 6/15 (USA) 220V50Hz = CEE 7/VII (EU) 240V50Hz = AS 3112 (Australia/New Zealand) |
| Duty cycle: | Continuous |
| Accuracy: | |
| Motor speed adjustment resolution: | 0.1% increments |
| Display: | Backlit LCD, UV resistant |
| Keypad: | Positive action tactile switch keypad |
| Enclosure: | NEMA 4X (IP66), Polyester powder coated aluminum. |
| Product weight: | 24lb. (10.9 Kg) |
