Short Description
China Blue-White Hybrid Ultrasonic Flowmeter Supplier Honest provides Sonic-Pro Hybrid Ultrasonic Flowmeters, can be configured for easy installation.
Keywords: Flowmeter,
 |
Previous: Endress Hauser Electromagnetic Flowmeter, 50P
Next: Blue-White Ultrasonic Flowmeter, Sonic-Pro S4
Next: Blue-White Ultrasonic Flowmeter, Sonic-Pro S4
Blue-White Hybrid Ultrasonic Flowmeter, Sonic-Pro Key Specifications / Features
- User-selectable Doppler or Transit Time operating modes for measurement of both clean and dirty fluids
- The meter can be factory configured for easy installation
- Custom quality metric algorithms and DSP technology for reliable, high accuracy measurements
- To allow for changes in the fluid’s particle count, SonicPro monitors the signal gain and employs an
Automatic Gain Control (AGC) algorithm that periodically adjusts the gain, maintaining the optimum power level
- Smart external communication with simple, intuitive, Sonic-Pro software
- Portable, rugged carrying case for easy transportation between applications
- 2 year factory warranty
- Pipe Sizes
T-Track fitting allows for small pipe diameter capabilities (1/2”-24”)
Pipe size range ½”-100”
- Fluid
Virtually any acoustically conductive fluid, Dirty or Clean
Doppler Mode:
Requires particles to be present in the flow stream to “reflect” the sound waves. (ie. Air bubbles, sand, etc.)
Operational Environment: fluid contains .02%-15% (200-150,000 ppm) of particles.
Transit Time Mode:
Requires relatively “clean” fluid to enable the sound waves to complete a circuit.
Operational Environment: 0%-10% (0-100,000 ppm) of particles.
- Accuracy
+/- 1% of rate in Transit-Time mode greater than 1 ft/sec fluid velocity
+/- 0.01 ft/sec in Transit-Time mode less than 1ft/sec fluid velocity
+/- 2% of rate in Doppler mode greater than 5 ft/sec fluid velocity
+/- 0.10 ft/sec in Doppler mode less than 5 ft/sec velocity
- Interface & Data
Data logging: to standard SD Card supplied with unit. User configurable to time interval, flow rate and
total set-point triggers. 500,000 events with included 32MB SD Card.
Optional Computer Connection: Ethernet, USB, RS-232, RS-485. Permits remote access and control of
all functions including real-time display, system configuration, data logging, remote data capture as well as
process control functions. Software permits remote internet access through local network setup.
Optional Process Control: three independently configurable 10 amps, form C relays. Configure to flow
rate for high/low/range rate alarm for to flow total for wither manual trigger batch operations
of flow triggered batch operations.
4-20 mA output: Fully configurable
0 – 1000Hz Pulse Output: Fully configurable
- Environment
NEMA 4X (IP66), Powder Coated aluminum, SS clamps & hardware
- Dimensions
Meter size: 11” H x 8 ½”W x 5” D (279H x 218W x 127D mm)
Shipping dimensions: 21” H x 17” W x 9 ½” H
Weight: 24 lb. (10.9 Kg.) Includes carry case, Excludes T-Track fixture
- The meter can be factory configured for easy installation
- Custom quality metric algorithms and DSP technology for reliable, high accuracy measurements
- To allow for changes in the fluid’s particle count, SonicPro monitors the signal gain and employs an
Automatic Gain Control (AGC) algorithm that periodically adjusts the gain, maintaining the optimum power level
- Smart external communication with simple, intuitive, Sonic-Pro software
- Portable, rugged carrying case for easy transportation between applications
- 2 year factory warranty
- Pipe Sizes
T-Track fitting allows for small pipe diameter capabilities (1/2”-24”)
Pipe size range ½”-100”
- Fluid
Virtually any acoustically conductive fluid, Dirty or Clean
Doppler Mode:
Requires particles to be present in the flow stream to “reflect” the sound waves. (ie. Air bubbles, sand, etc.)
Operational Environment: fluid contains .02%-15% (200-150,000 ppm) of particles.
Transit Time Mode:
Requires relatively “clean” fluid to enable the sound waves to complete a circuit.
Operational Environment: 0%-10% (0-100,000 ppm) of particles.
- Accuracy
+/- 1% of rate in Transit-Time mode greater than 1 ft/sec fluid velocity
+/- 0.01 ft/sec in Transit-Time mode less than 1ft/sec fluid velocity
+/- 2% of rate in Doppler mode greater than 5 ft/sec fluid velocity
+/- 0.10 ft/sec in Doppler mode less than 5 ft/sec velocity
- Interface & Data
Data logging: to standard SD Card supplied with unit. User configurable to time interval, flow rate and
total set-point triggers. 500,000 events with included 32MB SD Card.
Optional Computer Connection: Ethernet, USB, RS-232, RS-485. Permits remote access and control of
all functions including real-time display, system configuration, data logging, remote data capture as well as
process control functions. Software permits remote internet access through local network setup.
Optional Process Control: three independently configurable 10 amps, form C relays. Configure to flow
rate for high/low/range rate alarm for to flow total for wither manual trigger batch operations
of flow triggered batch operations.
4-20 mA output: Fully configurable
0 – 1000Hz Pulse Output: Fully configurable
- Environment
NEMA 4X (IP66), Powder Coated aluminum, SS clamps & hardware
- Dimensions
Meter size: 11” H x 8 ½”W x 5” D (279H x 218W x 127D mm)
Shipping dimensions: 21” H x 17” W x 9 ½” H
Weight: 24 lb. (10.9 Kg.) Includes carry case, Excludes T-Track fixture
