Short Description
Model No.: 4T725Brand.: TrumeterClicks: 1363
China Trumeter Incremetal Encoder Supplier Honest provides 4T725 Electronic Incremetal Encoders, aluminium housing with protective finish.
Low cost rugged encoder 10mm shaft diameter Square mount flange Quadrature output.
This low cost and very rugged size 25 encoder has been designed to suit a wide variety of industrial applications. The unit has a 10mm diameter shaft. A square mounting flange is fitted as standard. A 2M cable is fitted; this enters the unit via a gland situated on the side of the unit. The Output circuit has a push/pull output as standard, signals A, B, output.
Features:
Quadrature output
Square mounting flange enables easy mounting
Robust heavy duty 10 mm shaft
Ideal replacement for mechanical counters when used in conjunction with a suitable electronic counter.
Specification:
Input voltage range: 5 to 24V (+ 10%)
Regulation, for 5V operation: 5%, with 2% maximum ripple
Current consumption: 50 to 100 mA typical
Output circuits: A, B, @ 20mA each
Frequency response: 20 KHz
Accuracy: 0.017° or 1 Arc/Min
Max shaft speed: 6,000 rpm continuous
Shaft sizes and types: 10mm diameter
Housing: Aluminium with protective finish
Mounting: Square flange
Operating temp: -10°C to +70°C
Humidity: 95% RH
Protection: IP54
Ordering Information:
- 4T734 Encoder, 10mm shaft diameter, Square mount flange, Quadrature output
- 4T734PPF10SG20333 333PPR Push pull output
- 4T734PPF10SG20500 500PRP Push pull output
- 4T734PPF10SG21000 1000PRP Push pull output