Hans Schmidt Torque Meter, HTGS

Hand-held torque meter with separate sensor for measuring the torque of screws, components, screw and plug connectors, drive shafts etc. 
Mains and battery operation with memory and output signal 

Torque meter with digital output signal for data processing with a PC 

Special Features:
-    Two selectable modes: Real Time: to display torque transition
                                            Peak Mode: to capture the peak torque achieved during a test
-    Display of opening or closing torque (clockwise and counterclockwise torque)
-    Torque meter with high internal sampling rate of 2000 times/sec
-    Display update time 10 times/sec
-    Easy to read Display
-    Selectable units: Nm, Ncm, kgfm, kgfcm, lbf.in and ozf.in
-    Multi language set up menu: English, german, spanish, French, italian, chinese, japanese, Korean
-    Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs
-    Storage of 1000 values for recall:
- on the display
- for data transfer to PC
- for printing with report
-    4 output signals: USB, RS232, analog and Mitutoyo Digimatic
-    6 different chucks available
-    The torque sensors of model HTGS-10N include an additional supporting handle for better operation

Standard Features:
-    Inclusive 30 days trial version of Software ?Force Recorder Professional?
-    Torque measuring unit for fast, accurate measuring
-    High repeatability
-    Easy to use
-    Manufacturer`s certificate with measured values is included

Available Models:

Model	Model	Measuring range	Resolution	chuck Ø in mm
HTGS-2N	HTGA-2N	0 - 2.000 Nm (200 Ncm)	0.001 Nm (0.1 Ncm)	0.5 - 6.5
HTGS-5N	HTGA-5N	0 - 5.000 Nm (500 Ncm)	0.001 Nm (0.1 Ncm)	0.5 - 6.5
HTGS-10N	HTGA-10N	0 - 10.00 Nm (1000 Ncm)	0.01 Nm (1 Ncm)	0.5 - 6.5