Short Description
China Hans Schmidt Torque Meters Supplier Honest provides MTG Torque Meter, with memory and output signal for checking the opening and close torque.
Keywords: Torque Meter,
 |
Hans Schmidt Torque Meters, MTG Key Specifications / Features
Automatic desktop-torque meter with memory and output signal for checking the opening and close torque of screw caps of bottles, glas jars, cosmetics etc.
For applications in beverage, cosmetic and pharmaceutical industry etc.
Torque meter assures consistent, identical measuring conditions
Special Features:
- Torque will be measured without influence by the operator. The results are more accurate and significante as measured with a manual device.
- 3 operation modes:
Normal: Revolution occurs in one direction, until stop-switch will be pressed
+NG Stop (Display: +): Revolution occurs in one direction, until the adjusted value is reached
Endurance Test (Display: *): Repeats the operation in two directions (open - close), within the adjusted limits. The number of operations are shown in the display.
- 2 display modes:
real time - display the actual force and transfers the reading to the PC
peak force - to measure and save the peak force
- Size of container: Cap ? 20 - 90 mm
Table ? 20 - 180 mm
Height 80 - 240 mm
- Ball bearing mounted working table with 50 mm gummed spring pins
- The cap fastener is equipped with 20 mm gummed spring pins. The fixing screw permittes an accurate clamping torque of 0.5, 1.0, 1.5 or 2.0 Nm. Therefore constant basic conditions can be established.
- Infinitely adjustable speed 3 - 90 degree/sec
- Torque meter with high internal measuring frequency of 1000 times/sec to record peak values and for data transfer of test series to the PC
- Display the opening or closeing torque (clockwise and counter clockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display
- Storage of 1000 values for recall:
- on the display
- for data transfer to a PC
- for printing with report
- 3 interfaces: USB, RS 232 and ± 2 V analog
Standard Features:
- Automatic torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Mains operation
- Manufacturers certificate with measured values included
Available Models:
For applications in beverage, cosmetic and pharmaceutical industry etc.
Torque meter assures consistent, identical measuring conditions
Special Features:
- Torque will be measured without influence by the operator. The results are more accurate and significante as measured with a manual device.
- 3 operation modes:
Normal: Revolution occurs in one direction, until stop-switch will be pressed
+NG Stop (Display: +): Revolution occurs in one direction, until the adjusted value is reached
Endurance Test (Display: *): Repeats the operation in two directions (open - close), within the adjusted limits. The number of operations are shown in the display.
- 2 display modes:
real time - display the actual force and transfers the reading to the PC
peak force - to measure and save the peak force
- Size of container: Cap ? 20 - 90 mm
Table ? 20 - 180 mm
Height 80 - 240 mm
- Ball bearing mounted working table with 50 mm gummed spring pins
- The cap fastener is equipped with 20 mm gummed spring pins. The fixing screw permittes an accurate clamping torque of 0.5, 1.0, 1.5 or 2.0 Nm. Therefore constant basic conditions can be established.
- Infinitely adjustable speed 3 - 90 degree/sec
- Torque meter with high internal measuring frequency of 1000 times/sec to record peak values and for data transfer of test series to the PC
- Display the opening or closeing torque (clockwise and counter clockwise torque)
- 3 selectable units: Nm, kgfm, Lb.in or Ncm, kgfcm, Lb.in
- Programmable high/low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display
- Storage of 1000 values for recall:
- on the display
- for data transfer to a PC
- for printing with report
- 3 interfaces: USB, RS 232 and ± 2 V analog
Standard Features:
- Automatic torque meter for fast, accurate measuring
- High repeatability
- Easy to use
- Mains operation
- Manufacturers certificate with measured values included
Available Models:
| Model | Measuring Range | Resolution |
| MTG-2 | 0 - 2.000 Nm | 0.001 Nm |
| MTG-5 | 0 - 5.000 Nm | 0.001 Nm |
| MTG-10 | 0 - 10.00 Nm | 0.01 Nm |
| MTG-2NC | 0 - 200.0 Ncm | 0.1 Ncm |
| MTG-5NC | 0 - 500.0 Ncm | 0.1 Ncm |
| MTG-10NC | 0 - 1000 Ncm | 1 Ncm |
