Short Description
China Iwaki Hi-Techno Pump Supplier Honest provides IX Hi-Techno Pumps, efficient head design is incorporated with high compression, safety design.
Keywords: Hi-Techno Pump,
 |
Previous: Iwaki Mechanically-Driven Diaphragm Metering Pump, LK-TC
Next: Iwaki Mechanically-driven Metering Pump, AX-K
Next: Iwaki Mechanically-driven Metering Pump, AX-K
Iwaki Hi-Techno Pump, IX Key Specifications / Features
Features of IX series:
- A wide turn down ratio
A control motor adjusts the discharge and suction speeds to meet a wide turndown ratio of 750:1.
- Efficient pump head design is incorporated with high compression
Fast priming without air locks is achieved with a high compression ratio due to a fixed (maximum) stroke length.
- Viscous liquid transfer
Standard IX series is capable of pumping liquid viscosities of up to 1000mP?a. Contact us for higher viscosity applications.
- Safety design
Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.
- Precise chemical dosing operation
The valve design maintains precise dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (±1%) all with a cost effective design from a mechanically driven diaphragm pump.
- Constant injection with low impact
Flow control via discharge speed adjustment (with a fixed suction speed) assures constant injection at any flow rate. This system also reduces impact (inertia force) and load to the discharge line.
- IP65
One of the IX features is multi-voltage operation (100 to 240VAC) compatible worldwide. Compliant to UL, CE standards.
Specification of pump (50/ 60Hz)
- A wide turn down ratio
A control motor adjusts the discharge and suction speeds to meet a wide turndown ratio of 750:1.
- Efficient pump head design is incorporated with high compression
Fast priming without air locks is achieved with a high compression ratio due to a fixed (maximum) stroke length.
- Viscous liquid transfer
Standard IX series is capable of pumping liquid viscosities of up to 1000mP?a. Contact us for higher viscosity applications.
- Safety design
Standard to all models is a diaphragm rupture detector, protecting users and the environment. Also, a detector for abnormal operation protects the pipework in case of an accidental high discharge pressure caused by clogging or improper operation. A drain hole also ensures safe operation even when the diaphragm is damaged.
- Precise chemical dosing operation
The valve design maintains precise dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (±1%) all with a cost effective design from a mechanically driven diaphragm pump.
- Constant injection with low impact
Flow control via discharge speed adjustment (with a fixed suction speed) assures constant injection at any flow rate. This system also reduces impact (inertia force) and load to the discharge line.
- IP65
One of the IX features is multi-voltage operation (100 to 240VAC) compatible worldwide. Compliant to UL, CE standards.
Specification of pump (50/ 60Hz)
| Max. discharge capacity range | 0.013 to 2.5 / 0.013 to 2.5 L/min |
| Max. discharge pressure range | 0.4 to 1.0 MPa |
| Main materials | PVDF, SUS316 |
| Power consumption | 62 W |
| Liquid temperature range | PVDF type: 0 to 50˚C, SUS316 type: 0 to 80˚C |
| Power voltage | 100 to 240 VAC 50/60Hz |
Specifications of controller
| Operation mode | MAN (Manual) |
|
|
| EXT | Analogue control | 4 to 20, 0 to 20, 20 to 4, 20 to 0 mA | |
| Pulse control |
|
||
| Batch control |
|
||
| Interval batch control | Time: 0 to 9 day, 0 to 23 H, 1 to 59 min | ||
|
Capacity
|
|||
| Input | STOP / Pre-STOP / AUX / Interlock | No-voltage contact or open collector | |
| Profibus | Communication protocol: Profibus-DP International standard: Compliant to EN50170 (IEC61158) |
||
| Analogue | 0 to 20 mA DC (Internal resistance is 200 Ω.) | ||
| Pulse | No-voltage contact or open collector (MAX pulse frequency is 100 Hz.) | ||
| Output | Alarm 1 | No-voltage contact (Mechanical relay) 250 VAC 3A (Resistive load) Selectable: STOP, Pre-stop, Interlock, Leak Detection and Motor Overload. |
|
| Alarm 2 | No-voltage contact (PhotoMOS relay) AC250V 3A (Registive load) Selectable: STOP, Pre-STOP, Interlock, Leak Detection and Motor Overload. |
||
| Power supply | 12 VDC 30 mA or below | ||