Short Description
China Iwaki Non-metal Magnetic Drive Turbine Pump Supplier Honest provides MDT Non-metal Magnetic Drive Turbine Pump, seal-less construction, compact.
Keywords: Turbine Pump,
 |
Iwaki Non-metal Magnetic Drive Turbine Pump, MDT Key Specifications / Features
Features of MDT series:
- Seal-less construction
Thanks to magnet drive seal-less construction, no liquid leaks and no shaft seal replacement is required.
- Non-metal construction
Wet ends are corrosion resistant materials such as PPS, PEEK, ceramic, carbon. It can handle various chemicals such as acid and alkaline solutions because no metal is used.
- High pressure/ high vacuum
Small size but high pressure up to 0.35MPa is available. It can be used for negative pressure of suction side because it makes suction pressure up to 8.00kPa.
- Compact design
Ideal for incorporation in equipment and apparatus because it is small size and compact design
Specifications (50/ 60Hz)
- Seal-less construction
Thanks to magnet drive seal-less construction, no liquid leaks and no shaft seal replacement is required.
- Non-metal construction
Wet ends are corrosion resistant materials such as PPS, PEEK, ceramic, carbon. It can handle various chemicals such as acid and alkaline solutions because no metal is used.
- High pressure/ high vacuum
Small size but high pressure up to 0.35MPa is available. It can be used for negative pressure of suction side because it makes suction pressure up to 8.00kPa.
- Compact design
Ideal for incorporation in equipment and apparatus because it is small size and compact design
Specifications (50/ 60Hz)
| Max. discharge capacity range | 14 to 17/16 to 20 L/min |
| Max. discharge pressure | 0.35 MPa |
| Main materials | GFRPPS, CFRPPS, CFRPEEK |
| Suction, discharge bore | R1/2 or 1/2NPT |
| Power consumption | AC100V/220V 180/220W Single phase or AC200V 180/220W 3 phase |
| Liquid temp. range | −20 to 95˚C (depending on liquid) |
| Sealing method | Seal-less construction |
