Short Description
China Iwaki Process Magnetic Drive Pump Supplier Honest provides AMP Process Magnetic Drive Pumps, unique design prevents abnormal operation.
Keywords: Drive Pump,
 |
Iwaki Process Magnetic Drive Pump, AMP Key Specifications / Features
Features of AMP series:
- Unique design prevents abnormal operation
The pump design features a Non contact system. The pump exhibits outstanding durability in air ingress to the suction.
Note: dry running is not permitted.
- Back pullout system
The back pullout system allows easy maintenance and inspection without removing piping. The motor can be safely removed without chemical leakage (pumps on base plates only).
- Highly durable structure
A ductile cast iron shell adds strength and durability to the polypropylene wet ends. The rear casing which is subject to the highest stress, is reinforced with an FRP cover to increase strength. The maximum allowable casing pressure of 1.0MPa is a highlight feature amongst polypropylene pumps.
- Modular design and low maintenance cost
The pump is a modular design for ease of maintenance. Specific adjustments such as centering or checking clearances are not required. Any wear part can simply be replaced individually and reduces maintenance costs.
Specification (50/ 60Hz)
- Unique design prevents abnormal operation
The pump design features a Non contact system. The pump exhibits outstanding durability in air ingress to the suction.
Note: dry running is not permitted.
- Back pullout system
The back pullout system allows easy maintenance and inspection without removing piping. The motor can be safely removed without chemical leakage (pumps on base plates only).
- Highly durable structure
A ductile cast iron shell adds strength and durability to the polypropylene wet ends. The rear casing which is subject to the highest stress, is reinforced with an FRP cover to increase strength. The maximum allowable casing pressure of 1.0MPa is a highlight feature amongst polypropylene pumps.
- Modular design and low maintenance cost
The pump is a modular design for ease of maintenance. Specific adjustments such as centering or checking clearances are not required. Any wear part can simply be replaced individually and reduces maintenance costs.
Specification (50/ 60Hz)
| Max. discharge capacity range | 400 to 1000 / 500 to 1000 L/min |
| Max. head range | 14 to 36 / 22 to 49 m |
| Main materials | GFRPP |
| Required power range | 3.7 to 7.5 kW |
| Discharge bore | 40 mm, 50 mm |
| Liquid temperature range | 0 to 80˚C |
| Sealing method | Seal-less construction |
