NIKKISO EIKO Adony Metering Pump, AHB42-PCT-FN

The Adony Series Metering Pumps are low cost mechanically actuated diaphragm pumps, ideally suited for Chemical process, Potable and Waste-Water Treatment applications. The pumps are designed with slow stroking speeds to prolong service intervals and reduce the NPSH requirements of the pumps. The stroke length is manually adjustable during operation or stopped. Electronic Stroke Actuator and inverter control is also available.
The Adony Series is available with vertically mounted AC or DC motors. With a choice of liquid end materials and a wide range of accessories available, the Adony Series Metering Pumps offer an accurate, reliable, low cost solution to low pressure metering applications

Features:
-Design capacities to 589 GPH.
-Discharge pressure to 145 psig.
-PTFE faced composite diaphragm, for chemical compatibility.
-Liquid ends in PVC, 304SS or 316SS.
-Modular construction improves future flexibility.
-Vernier scale stroke adjustable while operating and stopped.
-Visual leak detection device.
 

Performance Table
Model		Capacity (GPH)	Pressure (PSIG)	Speed (SPM)	Connection Flange (in.)
AHA	01 11 12 21 22 31	0.66 1.33 2.69 4.43 8.87 17.4	145	58 58 116 58 116 58	1/2”
	32 41	34.8 44.3	73	116 58 116 58	3/4”
AHB	42 41	88.7 52.3	102
	42 51	104 95.1	73	116 58 116 58	1-1/2”
AHC	52 51	190 95.1	102
	52 61 62 71 72	190 171 342 294 589	44	116 58 116 58 116	2”

 

Material Code	PCT (PCF) (PCE)	PST (PSE)	SST	MMT
Diaphragm Head Diaphragm Ball Valve Valve Seat Ball Guide Gasket Back-up Plate Joint Screw Flange	PVC PTFE/EPDM Ceramic PVC*1 PVC PTFE*2 SS41 PVC PVC PVC	PVC PTFE/EPDM SUS304 SUS304*1 PVC PTFE*2 SS41 PVC PVC PVC	SUS304 PTFE/EPDM SUS304 SUS304 SUS304 PTFE SS41 SUS304 SUS304 SUS304	SUS316 PTFE/EPDM SUS316 SUS316 SUS316 PTFE SS41 SUS316 SUS316 SUS316