Trumeter Electronic Incremetal Encoder, 4T755

Miniature high precision encoder with a 10mm blind hollow shaft it has a 125Khz frequency response and can mount directly onto motor shafts. Quadrature output and Flexible mounting bracket.

Series 4T755 encoders are ideal for applications requiring a miniature, high precision low cost encoder. The encoder has a flexible mounting and a blind hollow shaft (10mm diameter) for mounting directly onto motor shafts etc. the Output circuit has a push/pull output as standard, signals A, B, output.
Features:
-    Quadrature output
-    Fixable by flexible mountings
-    10 mm blind hollow shaft
-    Ideal replacement for mechanical counters when used in conjunction with a suitable electronic counter
-    Operates at output frequency of up to 300 KHz
 
Specification:
Input voltage range: 5 to 24V (+10%)
Regulation, for 5V operation: 5%, with 2% maximum ripple
Current consumption: 80 mA typical
Output circuits: A, B, @ 20mA each
Frequency response: 125 KHz
Accuracy: ±0.017° or 1 Arc / Min
Max shaft speed: 7,500 rpm continuous
Shaft sizes and types: Blind hollow shaft (10mm diameter)
Housing: Aluminium with protective finish
Mounting: Hollow shaft/Flexmount
Operating temp: 0°C to +70°C
Humidity: 95%RH
Protection: IP54

Ordering Information:
-    4T755High precision encoder, 10mm blind hollow shaft, 125Khz frequency response, Quadrature output
-    4T755150PP0333328 333PPR Push pull output
-    4T755150PP0500328 500PPR Push pull output
-    4T755150PP1000328 1000PPR Push pull output