Trumeter Electronic Incremetal Encoder, 4T764

10mm hollow through shaft, Fixing from either side, Flexible mounting, 50Khz frequency response, Quadrature output Push pull output circuit.
4T764 Series encoders have a full through hollow shaft (which may be fixed at either end). The bore size is 10mm. The encoder body is fixed by means of two flexible mountings which compensate for minor shaft misalignment. The Output circuit has a push/pull output as standard, signals A, B,
Features:
Quadrature output
Fixable by flexible mountings
10 mm hollow through shaft, can be fixed at either end with optional clamp ring
Ideal replacement for mechanical counters when used in conjunction with a suitable electronic counter
 
Specification:
Input voltage range: 4.75 to 24V (+10%)
Regulation, for 5V operation: 5%, with 2% maximum ripple
Current consumption: 75 to 125 mA
Output circuits: A, B, @ 20mA each
Frequency response: 50 KHz
Accuracy: 0.0117° or 1 Arc / Min
Max shaft speed: 6,000 rpm continuous
Shaft sizes and types: 10mm through shaft
Housing: Aluminium with protective finish
Mounting: Shaft set screws or split clamp and flexible mounting springs
Operating temp: -10°C to +70°C
Humidity: 95%RH
Protection: IP54
 
Ordering Information:
4T764 Encoder, 10mm hollow through shaft, Quadrature output, Push pull output circuit
4T764PPT0G20333 333PPR Push pull output
4T764PPT0G20500 500PPR Push pull output
4T764PPT0G21000 1000PPR Push pull output
019044-01 Encoder shaft assembly for use with dual wheel measuring system
019141-01 Encoder mounting bracket for mounting encoder onto 1 or 2 wheel measuring systems
4TCLP Optional Encoder Clamp Ring